Author Archive: Bobby Medina

About Bobby Medina

Author at http://coolirononpatches.com

Why Buy Iron On Patches For Jackets?

patches for jackets

Human beings love the idea of being able to establish their individuality. There are an enormous number of ways they do this, everything from their creative work to the home in which they live. This makes sense, given that one of the ways humanity has survived through the centuries is by being able to distinguish their tribe. As it was in the past, so too it is now, with people finding as many different ways as possible to ensure that everyone around them can tell what tribe they’re with, what team they follow, what clubs they belong to, and just about anything else.

One of the most common ways to mark yourself as both an individual and a member of a tribe is with iron on patches for jackets. Iron on patches is a tried and true form of tribal marking, because of how easy they are to put on your clothes and how cheap they are to produce. If you’re not familiar with iron on patches, then you’ve been missing out you’re whole life!

What Are Iron On Patches?

Exactly as you might guess from the name, iron on patches are patches made of fabric that you can iron onto your clothes. A special, non-toxic, chemical on the back of the patch is then heated enough to melt against the fabric of your clothes. Once melted, the patch stays in place no matter how many times you put the clothes through the wash. This means you don’t have to worry about having sewing skills, nor do you have to worry about what might happen if you don’t find a needle and thread before you get a chance to put the patch on.

The iron on nature of the patches also saves a significant amount of time. Instead of having to sit for half an hour or more as you pull needle and thread through fabric, you can instead only run the iron over it. Within a few minutes, the patch is as stuck onto the fabric as it would be if you had sewn it on. This lets you put multiple patches onto multiple pieces of clothing without having to worry about setting aside a week or more to make it happen.

What Other Benefits Do Iron On Patches Have?

The times you most commonly see an iron on patch is from an event, or a club or some kind. This is because of how useful iron on patches for jackets can be in those two situations! For starters, everyone likes having a souvenir of an event they saw. It helps to remind them of the fun they had, of the things they saw and the new experiences they had. And since iron on patches is so inexpensive, they’re souvenirs that people won’t have to pay through the nose to get.

However, they’re also ideal for those who are throwing an event of some kind. You can easily get different patches made to represent the various places a contestant might win. That way, the first place winner can not only have a trophy and whatever the first place prize is, but also a patch that irons on to their favorite jacket or shirt. With that, they can show off to the world that they won the prize at your tournament or contest!

If you’re running a club or thinking of starting a club, iron on patches are a fantastic way to ensure people can boast about their membership. With an iron on patch, they can showcase to the world that they belong to your club, and proudly so. This is a great conversation piece, as it gets people around them asking about the club and what they do. This is not only a conversation piece for them but a way for you to advertise your club!

At the end of the day, iron on patches is a great thing for multiple reasons. If you’re thinking of starting a club, holding a tournament, or simply making a great souvenir for any guest at a business you run, iron on patches are one of the best choices you can make. They allow you to do so many things and give people a great piece of memorabilia.

Instructions: How To Iron On A Patch

picture of iron on patch

When it comes to iron patches, you do not need any previous experience to get the job done. However, there may be a time when the iron-on patches you use do not turn out in the way you would have liked them to. For this reason here is a step-by-step guide to ensure your patches turn out perfect every time.

What You Will Need

  • Transfers or Iron-On Patches
  • An ironing board and an iron
  • Blank paper sheet or a towel
  • The material, canvas tote or clothing that you would like to apply the patch to

There are several types of patches which you can choose from

About The Material And The Patches

Take into consideration the patches that you would like to iron-on:

    • If you have purchased the store-bought cool iron-on patches that are designed to be used as an iron-on, then you are probably faced with an easy project. These are the types of patches that usually will require that the iron is set on a “cotton” high steam setting. This is usually because these patch types are thick.
    • The printable transfers require a bit more finesse. This is because the transfer-paper requires just the right amount of heat to melt the adhesives onto the material or clothing. This means if you use too much or too little heat, the transfer will not adhere. To test out, the transfers cut a square that is ½” X ½” of the printed paper and then iron on a test-patch that won’t be noticeable.
    • You are also able to create your personal patches using fusible web and cotton fabric. The fusible web can be compared to thin sheets of adhesive which will melt when they come into contact with an iron. You can download your templates from the Internet. Use any quilting-grade material that is made mostly out of cotton.
    • What type of material can you use the iron-on patches on? The cotton materials will work out the best along with denim. If you decide to use a material that contains plastic you can risk melting or burning it when you use your iron. This is why it is always advisable to test the material with an iron before you decide to iron-on a patch.

Patch Placement And Design

If you have already decided on the placement of the patch, that is fine, but it is also advisable to try out a few different placements. You may find that another position works best than the one you initially decided on biker jackets or other clothing. When adding iron-on patches to a pair of jeans or denim material, use a safety pin to attach these patches to different places and then try the jeans on and look in the mirror to decide which area on the jeans would work best. Experimenting with your patches may give you inspiration for any future projects.

Ironing On The Patches

If you were smart, you would have thought to turn on your iron as soon as you started arranging the patches. If you didn’t, turn on the iron and make sure you wait until the iron reaches the desired temperature. Avoid adding any water to your iron and put the iron on the “cotton” setting.

Lay the material or the jeans, jacket or clothing onto your ironing board and ensure for the last time that you are completely satisfied with the placement of your patch. Put your paper sheet or towel gently over the patch or the patches. The paper or towel is designed to protect the garment and your patch from direct contact with your iron. Sometimes an iron can have a residue on that is not visible to the naked eye. Also, the fabric or the patches may be sensitive when exposed to heat and can melt it they are touched directly by an iron.

You will place the iron over the patch pressing down for a count of 10 to 15 seconds. The fusible webbing and printable transfers will vary, and it is always advisable to check the instructions before you begin.

Once your patch or patches have been pressed, allow them to cool and then test by gently picking at one of the edges. If the patch starts to peel away, you will need to press the patch for a bit longer. Make sure you avoid over-ironing your patches.